PiTower Gen 2 Mini PC Case for Raspberry Pi 5 Review — Is It Worth It? [2026]
.jpg)
PiTower Gen 2 Raspberry Pi 5 Mini PC Case
An aluminium and acrylic Pi 5 case with a 2.8-inch status screen, dual M.2 SSD slots and programmable RGB lighting.
Is the PiTower Gen 2 worth buying?
If you want your Raspberry Pi 5 to look and behave like a small desktop PC, it is a good-value case at $72.90. The status screen and dual M.2 slots are the real upgrades over Gen 1. It does not include the Pi, and the listing disagrees with itself on the SD card slot, so check that detail if you plan to boot from a card.
A tidy upgrade over Gen 1
PiTower Gen 2 measures 134.5 x 127 x 76 mm and weighs 385 g. It pairs an aluminium alloy shell with transparent acrylic panels, comes semi-pre-assembled with a cooling module, adapter board and cables, and ships in purple. The Pi 5 is bought separately.
What makes it stand out
2.8-inch IPS status screen
The 320 x 240 TFT shows CPU usage and temperature, SSD usage, network status and the time. A touch button turns the screen and ambient lighting on and off.
Dual M.2 slots for NVMe or SATA
You can fit two M.2 drives in 2230, 2242, 2260 or 2280 sizes (sold separately). That is room for a boot drive plus a storage drive.
Two fans, fan pads and RGB
Gen 2 swaps Gen 1's three fans for two and adds fan pads to cut noise. The RGB module has 11 presets. The page calls the cooling passive in one place and lists fans in another.
Semi-assembled and beginner-friendly
Pre-installed cooling, adapter board and cables mean you mostly add screws. A screwdriver and power adapter are included in the box.
Full spec sheet
| Compatibility | Raspberry Pi 5 (purchase separately) |
| Display | 2.8-inch TFT IPS, 320 x 240, 200 cd/m2 |
| Storage | 2x M.2, NVMe/SATA, 2230/2242/2260/2280 |
| Interfaces | Type-C, HDMI, USB-A 2.0 and 3.0, GPIO, Ethernet |
| Cooling | 2 fans (listed), aluminium shell |
| RGB | 11 presets, programmable |
| RTC | Supported |
| Size | 134.5 x 127 x 76 mm |
| Material | Aluminium alloy + acrylic |
| Weight | 385 g net |
| In the box | Case, power adapter, screwdriver |
| SD slot | Spec says Yes, comparison table says None |
Pros & Cons
Pros
- Dual M.2 SSD slots.
- Useful 2.8-inch system status screen.
- Semi-pre-assembled with cooling and adapter board.
- Aluminium and acrylic build.
- Adapter and screwdriver included.
Cons
- Raspberry Pi 5 is not included.
- Page contradicts itself on the SD card slot.
- Page describes both passive cooling and two fans.
- SSDs are sold separately.
- No customer ratings on the page.
Answers before you buy
Does it include a Raspberry Pi 5?
How many SSDs can it hold?
Does it have an SD card slot?
What is the screen for?
What colour is it?
A solid Pi 5 case with a little personality
PiTower Gen 2 does what a good Pi 5 case should: cool it, house a pair of SSDs and look good on a desk. It is a good buy once you resolve the SD slot question.
This page contains affiliate links. Teelacodes may earn a commission when you click through and complete a qualifying purchase, at no extra cost to you. Read the full disclosure policy. Prices, stock and promotion terms can change without notice — always confirm the final total and availability on crowpi.cc before ordering.
Popular Blog
