A battery-powered Zigbee smoke and heat alarm that pings your phone through the Linkstyle app.
It is a good value if you are already building a Linkstyle setup. It detects smoke and abnormally high temperature, warns you when someone removes it, and sends alerts to your phone. The big requirement is easy to miss: it needs the Linkstyle Smart Security Gateway, because it talks over Zigbee rather than Wi-Fi directly. Buy it on its own and it will not work.
A normal smoke alarm only helps if you are home to hear it. This one forwards alerts to your phone through the app. Despite the product name mentioning WiFi, the listing says it communicates over Zigbee 3.0 and requires the Smart Security Gateway.
It watches for both smoke and abnormally high temperature. A pyramid labyrinth chamber is meant to improve sensitivity so it picks up fewer smoke particles earlier.
Alarms push to the Linkstyle app, so a kitchen fire does not stay a secret while you are at work.
If someone takes it off the ceiling or wall, you get a tamper alarm, which is handy in rentals or shared spaces.
One CR123A battery gives roughly five years of standby per the spec sheet. It covers about 50 square meters (around 538 sq ft).
| Power supply | DC 3V, CR123A battery |
| Detection range | 50 m² (~538 sq ft) |
| Communication | Zigbee 3.0 |
| Standby time | ~5 years |
| Operating temp | -10 to 55°C |
| Operating humidity | ≤95% RH |
| Size | 70.5 x 70.5 x 29 mm |
| Requires | Linkstyle Smart Security Gateway |
Good value if you already run Linkstyle's gateway. Without it, skip. Score is the Teelacodes editorial opinion, not a customer rating.
This page contains affiliate links. Teelacodes may earn a commission when you click through and complete a qualifying purchase, at no extra cost to you. Read the full disclosure policy. Prices, stock and promotion terms can change without notice — always confirm the final total and availability on linkstyle.life before ordering.
Popular Blog