Autel MaxiDiag MD906 Pro Review — Is It Worth It? [2026]
.jpg)
Autel MaxiDiag MD906 Pro Scan Tool
The cheap way into an Autel with a proper touchscreen: all-system scans, 11 reset services, CAN FD and updates that do not expire.
Is the Autel MD906 Pro worth buying?
For a home garage or a small detailing or fleet setup, yes. The big selling point is the update policy: the listing says lifetime free updates with no subscription, which matters because most Autel tablets charge for updates after the first year or two. You also get a 5.5-inch Android touchscreen, a Bluetooth VCI, all-system AutoScan and the usual reset services (oil, EPB, SAS, BMS, TPMS, DPF and a few more). What you do not get is the bi-directional active tests that the MK808Z and the pro tablets offer, so this is a reader and resetter, not a full shop tool.
A handheld that skips the subscription
The MD906 Pro sits above the older MD808 Pro and below the MaxiCOM tablets. OBDPrice's own comparison says it adds a touchscreen, wireless VCI, support for newer vehicles and a buzzer over the MD808 Pro, and CAN FD support that the MX808S/MK808S lack. It is a 5.5-inch Android unit with 64GB of storage and a 5,000mAh battery.
What you get
Lifetime free updates
No annual fee is the headline. Over a few years that gap against a subscription tablet is easily worth more than the price difference between the two tools.
All-system scan and full OBDII
AutoScan checks modules across the car, reads and clears codes, shows live and freeze-frame data and runs Enhanced Mode 6. It supports all 10 OBDII test modes and I/M readiness checks, which is handy before an emissions test.
11 maintenance resets
Oil reset, brake bleeding, injector, SAS, throttle, EPB, BMS, TPMS, DPF, AFS headlamp and A/F. That list covers most of what a home mechanic runs into after a brake or battery job.
Bluetooth VCI and a modern protocol
The wireless VCI means you are not tethered to the OBD port. CAN FD support is the practical future-proofing here, since newer cars use it and older cheap scanners cannot read them.
Full spec sheet
| Screen | 5.5-inch Android touchscreen |
| Storage | 64GB |
| Battery | 5,000mAh |
| Connectivity | Bluetooth VCI |
| OBDII | All 10 test modes, Mode 6 |
| Protocols | CAN FD supported |
| Service functions | 11 (oil, brake bleeding, injector, SAS, throttle, EPB, BMS, TPMS, DPF, AFS, A/F) |
| Updates | Lifetime free, no subscription |
| Price | $275.00 (was $299.00) |
Pros & Cons
Pros
- No subscription, updates are listed as lifetime and free.
- CAN FD support for newer vehicles.
- Touchscreen and Bluetooth VCI at a low price.
- 11 reset services cover the common jobs.
- Cheapest of the four tools reviewed here.
Cons
- No bi-directional active tests, as far as the listing shows.
- No key programming or ECU coding.
- 5.5-inch screen is small if you work on it all day.
- Coverage detail by brand is thin on the page.
Answers before you buy
Do I have to pay for updates?
Does it support CAN FD?
Can it do active tests?
How is it better than the MD808 Pro?
Is the price fixed?
The sensible budget Autel
If your jobs are codes, live data and resets, this does it without a yearly bill. If you want to command components or code modules, spend more.
This page contains affiliate links. Teelacodes may earn a commission when you click through and complete a qualifying purchase, at no extra cost to you. Read the full disclosure policy. Prices, stock and promotion terms can change without notice — always confirm the final total and availability on obdprice.com before ordering.
Popular Blog
